Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
High-Resolution PTZ Camera
These instructions are intended for installers
of video surveillance systems . Please read the
instructions carefully prior to installation and
keep them for later reference . All mounting
components and connections described can be
found on page 2 .
1 Applications
This high-resolution colour camera is specially
designed for video surveillance systems (CCTV) .
The video formats AHD, HD-TVI and HD-CVI
support transmission of high-resolution analog
video signals (1080p) via standard coaxial cables
with a maximum length of 300 m . As an alterna-
tive, the video signal output can be switched to
the CVBS signal format . Due to its weatherproof
housing (IP 66), the camera is also suited for
outdoor applications . The camera is equipped
with a 2 megapixel image sensor and a zoom
lens with autofocus function and controlled iris .
Camera features include backlight compensa-
tion, digital noise reduction, mirror image and
motion detection . Infrared LEDs for close-range
and long-range surveillance are provided . In the
dark, the LEDs will illuminate a surveillance zone
of up to 60 m and the camera will switch to
B/W mode .
The movements of the camera (pan and tilt)
and of the lens (zoom and focus) are controlled
via the PTZ control functions of a video recorder
or via the RS-485 interface .
The camera allows to save:
–
more than 100 camera positions as presets
–
4 automatic camera scans
–
4 recorded movement sequences (patterns)
–
4 tours based on the presets
14
2 Safety Notes
The units (camera and power supply unit) cor-
respond to all relevant directives of the EU and
are therefore marked with
WARNING The power supply unit uses
dangerous mains voltage . Leave
servicing to skilled personnel
only . Inexpert handling of the
unit may result in electric shock .
•
Protect the camera against extreme tempera-
tures (admissible ambient temperature range:
−10 °C to +50 °C) .
•
The power supply unit is suitable for indoor
use only . Protect it against dripping water,
splash water and high air humidity . The admis-
sible ambient temperature range is 0 – 40 °C .
•
Do not operate the units and immediately
disconnect the power supply unit from the
mains socket
1 . if one of the units is visibly damaged,
2 . if a defect might have occurred after a unit
was dropped or suffered a similar accident,
3 . if malfunctions occur .
In any case the units must be repaired by
skilled personnel .
•
For cleaning the power supply unit, only use a
dry, soft cloth; never use water or chemicals .
For cleaning the camera, a damp cloth and a
mild detergent may be used .
•
No guarantee claims for the units and no li-
ability for any resulting personal damage or
material damage will be accepted if the units
are used for other purposes than originally
intended, if they are not correctly connected
or operated, or if they are not repaired in an
expert way .
If the units are to be put out of oper-
ation definitively, take them to a local
recycling plant for a disposal which is
not harmful to the environment .
.
Werbung
Inhaltsverzeichnis
