Setting Up And Connecting; Package Contents And Transport Inspection; Set-Up Location Requirements - Silvercrest KH 2190 Bedienungsanleitung

Setting up and connecting

Setting up and connecting

Package contents and transport inspection

The appliance is delivered with the following components as
standard:
● Clock Radio
● Operating instructions
Extract the appliance and the instruction manual from the carton
and remove all packaging material.
NOTE
► Check the contents to ensure everything is present and there
are no signs of visible damage.
► If the contents are not complete or are damaged as a result
of defective packaging or through transportation, contact the
Service Hotline (see chapter Service).

Set-up location requirements

For safe and fault free operation of the appliance the set-up
location must comply with the following provisions:
■ Place the appliance on a fi rm, fl at and even surface .
■ Place the appliance so that the ventilation slots are not covered.
■ Do not place the appliance in a hot, wet or very humid location
or in the vicinity of fl ammable materials.
KH 2190
GB
MT
75