Herunterladen Inhalt Inhalt Diese Seite drucken

Specification; Output Tables; Warranty; Environment And Recycling - STIEBEL ELTRON SHD 30 S Bedienung Und Installation

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
inStallation | warranty | environMent anD reCyCling

SpeCifiCation

16.3 Specification
Hydraulic data
Nominal capacity
Amount of mixed water 40 °C (15 °C/60 °C)
Electrical data
Connected load ~ 400 V
Rated voltage
Phases
Frequency
Single circuit operating mode
Dual circuit operating mode
Application limits
Temperature setting range
Max. permissible pressure
Test pressure
Max. permissible temperature
Max. flow rate
Energy data
Standby energy consumption/24 h at 65 °C
Versions
IP rating
Sealed unvented type
Colour
Dimensions
Height
Width
Depth
Weights
Weight, full
Weight, empty

16.3.1 Output tables

The heat-up time depends on the cylinder capacity, cold water
inlet temperature and appliance output. For the heat-up time with
the booster heater (21 kW) and a cold water supply of 10 °C, see
the following table.
Heat-up time (cylinder operation)
Temperature setting
°C
SHD 30 S
min
SHD 100 S
min
In instantaneous DHW cylinder operation, the following amounts
of hot water can be drawn off.
DHw output (instantaneous operation)
DHW temperature
°C
Cold water supply 6 °C
l/min
Cold water supply 10 °C
l/min
Cold water supply 14 °C
l/min
26
|SHD S
65
85
6
8
18
25

Warranty

The warranty conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products, it is increasingly the
38
55
case that warranties can only be issued by those subsidiaries.
9.4
6.1
Such warranties are only granted if the subsidiary has issued
10.7
6.7
its own terms of warranty. No other warranty will be granted.
12.7
7.3
We shall not provide any warranty for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not affect warranties issued by any importers.

Environment and recycling

We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
SHD 30 S
073059
l
30
l
59
kW
3.5/21
V
400
3/PE
Hz
50
X
X
°C
35-85
MPa
0.6
MPa
0.78
°C
110
l/min
18
kWh
0.45
IP25
X
white
mm
770
mm
410
mm
420
kg
54.3
kg
24.3
www.Stiebel-eltron.CoM
SHD 100 S
073060
100
195
3.5/21
400
3/PE
50
X
X
35-85
0.6
0.78
110
18
0.77
IP25
X
white
1050
510
510
140.1
40.1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Shd 100 s

Inhaltsverzeichnis