Maintenance And Cleaning; Warranty - Tescoma Delicia Bedienungsanleitung

a INSTRUCTIONS FOR USE
Characteristics
Excellent for decorating pastries with egg white frosting, buttercream, cream cheese and chocolate cream, mel-
ted chocolate, whipped cream, etc. Comes with 5 nozzles for various decorating techniques including very thin
patterns and writing. With a practical holder for easy fi lling and setting the pen aside during the decorating
process and includes a multi-purpose cleaning piece.
Before fi rst use
Disassemble the decorating pen into individual parts, rinse each under running water and leave to dry.
Application
Attach the holder by pushing the clean suction knobs onto a clean non-porous surface, e.g. a dessert plate, me-
lamine tray, etc. Insert the chosen nozzle into the hole of the pen nut (Fig. 1) and screw onto the body of the pen
(Fig. 2). Insert the nozzle part of the pen into the holder. Attach the funnel to the open end of the silicone body of
the pen and fi ll the pen with cream using a spoon, up to about 2 cm below the rim (Fig. 3).
Useful hint: Gently push the fl exible body of the pen now and then during the fi lling process to ensure that the pen is
fi lled evenly with cream.
Remove the funnel from the fi lled decorating pen, transfer the piston nut to the bottom of the piston (by scre-
wing it on) (Fig. 4) and close the pen using the lug-type closure (Fig. 5). Remove the decorating pen from the
holder and position it with the nozzle pointing upwards. Slightly turn the piston clockwise until the cream begins
to fl ow slowly from the nozzle (Fig. 6).
Decorating
Hold the decorating pen in the same way as you hold a normal pen, press it gently and decorate (Fig. 7).
For a fi ne pattern, choose one of the nozzles that have a small hole; make sure that the cream used for fi ne
patterns is liquid enough. Take a nozzle with a larger hole for decorating with thicker creams, e.g. buttercream,
cream cheese, chocolate cream and whipped cream. For an extra thick decorating line, attach the nut without
a nozzle to the body of the pen.
Keep the silicone body of the pen full enough by tightening the piston during the process. If you need to take
a break in the decorating process, set the decorating pen aside into the holder or attach the holder to the nozzle
and use it as a plug protecting the content from drying (Fig. 8). If the nozzle becomes clogged during the deco-
rating process, clean the hole of the nozzle using the multi-purpose cleaning piece.

Maintenance and cleaning

Disassemble, rinse and leave the decorating pen to dry after each use. The silicone body of the pen is dishwasher
safe. Do not wash the other parts in a dishwasher.

Warranty

A 3-year warranty period applies to this product from the date of purchase.
The warranty never covers defects: