Installation - Indesit HTL 76 Installations- Und Bedienungsanleitungen

Installation

Fastening the hood to the wall
cabinet
Fit the drilling template which comes with
the hood on the inner right side of the
cabinet making sure side "A" coincides
with back part. Make at least two 2 mm.
Diameter holes at points 1-2 (Diagram 1).
Perform the same operations on the inner
left side.
Use screws F (to fasten the hood to the
Diagram 1
cabinet (diagram 2).
Extractable drawer adjustment
The hood can be installed in cabinets
with different depths, the front of the box
Diagram 2
must always be in line with the cabinet.
For alignment adjust the back stops of the
box.
For box adjustment, loosen screws M and
slide square plates P as necessary and
tighten screws M (Diagram 3).
Diagram 3
17