vita MultiPump Bedienungsanleitung Seite 19

VITA MultiPump
Pos Action
4 Detach the handle and store it safely together
with the two screws. You will need everything
together again in order to reattach the handle.
5 Take the VITA MultiPump bracket and place it on
the pump in such a way that the mounting holes
are positioned directly above the screw holes of
the VITA vacuum pump handle.
6 Now reattach the VITA vacuum pump handle
using the screws provided for this purpose.
To do so, use the hex key provided.
7 Now take the VITA MultiPump.
8 Place the VITA MultiPump in an upright position
so that you have access to the screw thread on
the underside of the housing.
E
Picture
19