Sleep Setting - auna iTuner CD Handbuch

SLEEP SETTING

This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. To activate the sleep function, press the SLEEP button repeatedly. The
time will change in the below sequence on every press:
Sleep OFF 15MINS
2. When your desired sleep time appears in the display, stop pressing the
button and the sleep function will be activated in two seconds. " " will
show on the display. Also the time remaining until switch off is displayed
next to the symbol in the display.
3. When the sleep timer counts down to zero, the unit will turn to standby
mode. To turn the sleep function off while the sleep timer is still counting
down, press the SLEEP button repeatedly to select "SLEEP OFF". " " will
disappear from the display.
4. Press the SLEEP button once to show the sleep timer status on the
display when it is turned on.
Alternatively:
1. Press the MENU button on the remote control to display the function
main menu. Press the PRESET
then press the SELECT button to confirm.
∧/∨
2. Press the PRESET
SELECT button to confirm.
∧/∨
3. Press the PRESET
SELECT button to confirm.
30MINS 45MINS 60MINS
∧/∨
buttons to select Main menu, and
buttons to select Sleep mode, and then press the
buttons to select sleep timer, and then press the
90mins 120mins
EN
67