Audio Input; Headphone Socket - auna iTuner CD Handbuch

EN
64

AUDIO INPUT

You can play sound from an external device via the device.
1. Connect the external device to the Audio Input on the device through
suitable RCA cable.
2. Press the MODE button repeatedly on the unit or press the AUDIO IN
button on the remote to select Line in mode.
3. Turn the VOLUME control on the unit or press the VOLUME +/– buttons
on the remote control to adjust the volume control for your desired
sound output level.
4. In Line in mode, operate your audio device directly for playback features.
When connecting the external audio device, refer to the owner's manual of
the external device.

HEADPHONE SOCKET

A 3.5-mm type stereo headphone socket is located at the back of the
unit. Connect a set of stereo headphones (not included) to this socket for
private listening without disturbing others. The speakers are automatically
disconnected when the headphones are in use.
When using headphones always set the volume to a low level before you
put the headphones on. Then insert the headphones and gradually increase
the volume to a comfortable listening level.
Long-term exposure to loud music may cause hearing damage. It is best
to avoid extreme volume when using earphones, especially for extended
periods of time.