Specifications - Makita BHR261 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Lamp
4-1. Reversing switch lever
5-1. Quick change chuck for SDS-plus
5-2. Change cover
5-3. Change cover line
6-1. Quick change drill chuck
6-2. Spindle
6-3. Change cover line
6-4. Change cover
7-1. Rotation with hammering
8-1. Rotation only
9-1. Hammering only
10-1. Grip base

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BHR261
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model BHR261T
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Explanation of general view
10-2. Teeth
10-3. Loosen
10-4. Tighten
10-5. Side grip
10-6. Protrusion
11-1. Bit shank
11-2. Bit grease
12-1. Bit
12-2. Chuck cover
13-1. Bit
13-2. Chuck cover
14-1. O symbol
14-2. Action mode changing knob
16-1. Depth gauge
17-1. Dust cup
19-1. Blow-out bulb
21-1. Chuck adapter
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
) : 91 dB(A)
pA
) : 102 dB(A)
WA
) : 92 dB(A)
pA
) : 103 dB(A)
WA
BHR261
363 mm
4.5 kg
ENE043-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
ENG905-1
Model BHR261
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4
21-2. Keyless drill chuck
22-1. Sleeve
22-2. Ring
23-1. Change cover line
23-2. Quick change chuck for SDS-plus
23-3. Change cover
24-1. Spindle
24-2. Quick change drill chuck
24-3. Change cover line
24-4. Change cover
25-1. Sleeve
25-2. Ring
25-3. Quick change drill chuck
26-1. Limit mark
27-1. Brush holder cap
27-2. Screwdriver
BHR261T
26 mm
13 mm
32 mm
0 - 1,200
0 - 4,800
387 mm
4.7 kg
D.C. 36 V
Wear ear protection
) : 13.5 m/s
h,HD
2
) : 11.0 m/s
h,CHeq
2
2
) : 3.0 m/s
h,D
2
ENG900-1
2
2