Installing The Foil Sensor (Optional) - Sentiotec Pro C3 Montageanleitung

Installation instructions, only for experts
4.5.

Installing the foil sensor (optional)

If one of the following infrared heat plates is connected to an additional output,
the foil sensor P-ISX-FF must be used:
● IR-WP-100
● IR-WP-175
● IR-WP-390
● IR-WP-510
● When installing the foil sensor, observe the operating instructions for the
infrared heat plates.
● Use of a foil sensor must be activated in the technician menu
(see 8.2. Settings in the technician menu on page 28).
WORLD OF WELLNESS
● IR-WPHL-100
● IR-WPHL-175
● IR-WPHL-390
● IR-WPHL-510
p. 17/52
En