en
Mechanical
connection
12
3
Installation
Fig. 1:
Mechanical connection (display rotated 90° compared to delivery status)
•
Insert the plug-on display
of the sensor.
•
Replace the fixing screw ➃ with the extended screw included in
the scope of delivery.
•
Place seals between sensor/plug-on display and plug-on display/
plug.
•
The display can be rotated 90°.
•
A sticker which is included in the scope of delivery and contains
information on the technical unit can be affixed beneath the LED
display.
The plug-on display is ready for operation following installation.
1
2
between the plug ➂ and plug base ➀
➁
3
4