Filling And Emptying The Tank - Skandika SUORA Aufbau- Und Bedienungsanleitung

Filling and emptying the tank

Open the tank and close the valve on syphon pump by turning it clockwise. Use a water source
which is located in a higher place than the tank. See figure B) for how to fill and figure C) for how
to empty the tank. Squeeze the pump 4 or 5 times, until the water flows. Turn the knob counter-
clockwise to allow air to penetrate into the pump.
Correct water level
You can find the water level gauge on the side of the tank. The maximum level for filling the tank is
Level 19! Never overfill the tank as this could damage the device and void the warranty.
We recommend filling water up to Level 17.
Notes:
- Change water regularly to avoid water gets bacteria-infested.
- If the local water quality is poor, replace it with distilled water.
24