Inhaltsverzeichnis
Werbung
Setting the Default Copy Options
You can set the default copy options for the scanner. This way, whenever you want to scan to the
printer, the most commonly used settings are already configured. Please refer to the previous section
for the list of options you can set as a default. Note that the list indicates when a feature cannot be
assigned a default value.
To access the Copier Default template from the scanner:
1.
Press the Menu button on the scanner.
2.
Press the Copier Default button on the LCD touch screen.
3.
Change the settings as needed on the Basic, Image Edit, and Advanced Copy tabs.
Press OK on the LCD screen to save these settings.
4.
To access the Copier Default template from the scanner:
1.
Input the scanner's IP address in the URL field of your web browser, or open it from the Network
Management Tool.
When the embedded web page opens, click on the Copier Default link on the left side of the page.
2.
Change the settings as needed, and then click the Update button to send the changes to the
3.
scanner.
4.
Power cycle the scanner.
Please refer to
Managing the Scanner Remotely
and navigating the scanner options remotely.
on page 89 for detailed information about accessing
Xerox DocuMate 3920
User's Guide
41
Werbung
Kapitel
Inhaltsverzeichnis
