Computer Instructions - Hudora HD 66 Gebrauchsanleitung

INSTRUCTIONS ON ASSEMBLY AND USE
EN

COMPUTER INSTRUCTIONS

TRAINING WITH THE TRAINING COMPUTER
The training computer is the ideal aid for effectively setting up your trai-
ning. We would recommend you speak with an expert (doctor, trainer)
and set out a training plan. Your computer will help you to check and
adhere to the guidelines. In this way you can ensure that your training
goals are being met efficiently.
Caution: the computer, and particularly the pulse monitor, are no
replacement for medical monitoring.
CLOCK MODE
• Once batteries are placed in the monitor, the clock can be set. Use the
UP and DOWN keys for setting the hours, and press the ENTER key.
The minutes can be set accordingly.
• The computer will enter the clock mode when there is no signal input
or no keys be pressed after 4 minutes. You can press ENTER key to
switch the clock and temperature at the clock mode or press other
keys to quit the clock mode.
• By holding ENTER key for over 2 seconds then you can set up TIME
by UP or DOWN keys.
OPERATING KEYS
1. UP:
During the setting mode, press the key to increase the value of Time,
Distance, RPM and Calories. During the CLOCK mode, you can set up
clock by this key.
2. DOWN:
During the setting mode, press the key to decrease the value of Time,
Distance, RPM and Calories. During the CLOCK mode, you can set up
clock by this key.
Note: During the setting mode, you can hold UP and DOWN keys together
for over two seconds then the setting value will reset to zero or default
value.
Art.-Nr. 65308
Stand 04/11
Seite 20/28
3. ENTER/RESET:
Press the key to accept the current data entry. During the no speed
mode, by holding this key for over two seconds then the computer will
re-power-on.
INSTRUCTION DESCRIPTION
1. CLOCK:
Display the current clock in hour and minute and second.
2. TEMPERATURE:
Display the current temperature.
3. TIME:
Shows your elapsed workout time in minutes and seconds. Your compu-
ter will automatically count up from 0:00 to 99:59 in one second interval.
You may also program your computer to count down from a setting value
by using the UP and DOWN keys. If you continue exercising once the time
has reached 0:00, the computer will begin beeping, and reset itself to the
original time set, letting you know your workout is done.
4. SPEED:
Displays your workout speed value in km per hour. If no speed signal
input or no keys be pressed then the computer enter clock mode auto-
matically.
5. DISTANCE:
Displays the distance traveled during your workout up to a maximum
of 99.9 km. Additionally you may also program your computer to count
down from a setting value by using the UP and DOWN keys. If you con-
tinue exercising once the setting value has reached 00.0, the computer
will begin beeping, letting you know your workout is done.
6. CALORIES:
Your computer will estimate the cumulative calories burned at any gi-
ven time during your workout. Additionally you may also program your
computer to count down from a setting value by using the UP and DOWN
keys. If you continue exercising once the setting value has reached 0, the
computer will begin beeping, letting you know your workout is done.
7. PULSE:
Your computer displays your pulse rate in beats per minute during your
workout.
8. RPM:
Your pedal cadence.
9. SCAN:
At the exercise mode, press the MODE key until appears the SCAN on
the LCD. Monitor will display the following function and each function
will keep 6 seconds on the main screen: TIME-SPEED-DISTANCECALO-
RIE-RPM-PULSE. For quitting this mode press the ENTER key.