Sending An Sms Message - AUDIOLINE TEL38 SMS Bedienungsanleitung

7.1

Sending an SMS message

1. Before you can work on the caller list, press several times the CLIP/
button, until you see the message SMS-Modus appearing in the display.
2. Confirm with the ENTER button. The message Verfassen? (Write message?)
will appear in the display.
3. Confirm with ENTER.
4. Now enter the required SMS message with a maximum of 161 characters.
Letters can be deleted with the
already entered can be specifically selected by using the Jogdial and deleted
with the button.
5. When your text is finished, press the Save button
6. Now select by means of the Jogdial whether you want to send the SMS to a
new phone number (Enter number?) or to a phone number that is already
stored in the phone book (Phone book?).
7. Confirm with ENTER.
8. Now either enter the required phone number or select a number from the
phone book using the Jogdial.
9. The SMS is sent directly by means of the ENTER button. During transmission,
the display will show the message Ausgehend ... (Outgoing) and then the
message Versendet (Sent).
10. If the SMS is not sent correctly, the messages Nicht versendet! (Not sent!)
and Erneut senden? (Resend?) will appear in the display. If you want to
resend the SMS, press the Enter button.
Notes:
1. The SMS will be saved in the OUTGOING folder.
2. Text is entered as described under Item 5.1 under entering names.
3. Text entry can be ended at any time by pressing the CLIP/
repeatedly.
- Sending and receiving SMS -
button. Individual letters within the text
.
/ button
/
49