Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Disposal; Warranty / Service Centre - Silvercrest SHTK 2000 C1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
After use / Cleaning and Care / Disposal / Warranty / Service centre
Allow the hairdryer to cool down.
Remove the cable by pressing the
feed button
. Please ensure that the mains ca-
4
ble
is not twisted.
6
CAUTION! RISK OF INJURY! The mains
lead
is drawn into the housing very quickly.
6
Ensure that you guide the mains lead
your other hand to prevent injuries.

Cleaning and Care

DANGER TO LIFE FROM ELECTRIC SHOCK!
Always remove the mains plug from the mains
socket before cleaning the hairdryer. Otherwise
there is a risk of electric shock.
Clean the hairdryer only in the manner indicated.
Under no circumstances must any liquid be al-
lowed to enter the hairdryer.
Do not clean the hairdryer in the dishwasher.
Do not clean the hairdryer with flammable liquids.
Never use corrosive or abrasive cleaners.
Clean the casing of the hairdryer and the acces-
sories with a soft cloth, which has been slightly
dampened with warm water.
Remove sucked-in fluff, dust and hair with twee-
zers or a brush from the air outlet opening
the air inlet openings
before every use.
Remove the filter
necessary. To do this you can either remove the
inner filter
upwards and then remove the filter
5 a
from front to back or you remove both filters
together from front to back (fig. C).
5 a
Insert the filters
5
the tabs lock into the notches of the casing on
the hairdryer and engage.
Place the filter
5 a
into place.

Disposal

The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
290337_silv_Ionen-Haartrockner SHTK 2000 C1_Content_OS.indd 19
cable
using
6
2
and the filter
,
3
5
5 a
,
from the hairdryer if
5
5 a
5
onto the hairdryer, so that
onto the filter
, until it snaps
5
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
In accordance with European Directive
(covering waste electrical and electronic
equipment) and its transposition into
national legislation, worn-out electrical
devices must be collected separately
and taken for environmentally compatible
recycling.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.

Warranty / Service centre

We provide a 3 year warranty from the date of
purchase for defects in material and manufacture
of the product.
,
The warranty does not cover:
·
Damage from improper use.
·
Wear parts.
·
Damage caused by the customer.
·
If the device has been opened by an unauthorised
repair shop.
,
This warranty does not affect the customer's legal
rights. The customer must provide proof of purchase
in order for any warranty claims within the warranty
period to be honoured. Warranty claims must be
filed with MGG Elektro GmbH, Düsseldorf, Germany
within 3 years from the date of purchase.
GB/IE
19
26.05.17 11:29

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis