Tv Display; Default Set; Version; Language - Samsung SMX-F50BP Benutzerhandbuch

TV DISPLAY

You can enable or disable the On Screen Display (OSD) that the
camcorder can display on a TV screen when you connect your
camcorder to a TV.
1.
Press the MENU button
Control (Left/Right) button
Settings" Control (Up/Down/
OK) button
"TV Display."
2.
Select the desired submenu item
with the Control (Up/Down)
button, and then press the OK button.
3.
Press the MENU button to exit the menu.
Submenu Items
Items
To show the OSD (On Screen Display) menus
Off
only on the camcorder's LCD screen.
To show the OSD menus on the LCD screen
On and the TV screen as well.
(Connecting to a TV
90 90
0:00:00 [475Min]
STBY
"
SCENE
Settings
Auto Power Off
:
PC Software
:
TV Display
:
Exit Select
On-screen
Use
display
-
-
page 92)

DEFAULT SET

You can restore all menu settings to their defaults.
1.
Press the MENU button
(Left/Right) button
"Settings"
Control (Up/Down/OK) button
"Default Set."
2.
Select "Yes" if you want all the
settings return to the default.
The Time Zone screen appears after all settings return to their
•
defaults.
3.
Set the date and time again.
• Do not turn off the power while using this function.
• After resetting the camcorder, set "Time Zone" and "Date/Time
Set." page 28
• Storage type is not restored after default setting. (SMX-F53/F54 only)
page 79

VERSION

You can view the camcorder's firmware version. To improve the
operation of the camcorder, the firmware version can be changed
without notice.
1.
Press the MENU button
(Left/Right) button "Settings"
Control (Up/Down/OK) button
Version."
2.
Press the MENU button to exit the
menu.

LANGUAGE

You can select a desired language to display the menu and
messages in. page 29
System setting
Control
STBY 0:00:00 [475Min]
SCENE
Settings
PC Software
:
TV Display
:
Default Set
Exit Select
page 28
Control
Version
" Samsung Electronics Co., LTD.
S/W 0.26, Dec 29 2010, 13:54:44
Exit OK