Anti-Shake(Hdis) - Samsung SMX-F50BP Benutzerhandbuch

ANTI-SHAKE (HDIS)
Use the Anti-Shake (HDIS) function to compensate for unstable
images caused by shaking movements when holding the
camcorder.
Select the Record (
page 24
1.
Press the MENU button
Control (Left/Right) button
"Anti-Shake (HDIS)."
2.
Select the desired submenu item
with the Control (Up/Down)
button, and then press the OK
button.
3.
Press the MENU button to exit the
menu.
Submenu Items
Items
Off To disable the function.
To enable the Anti-Shake (HDIS) function to
On
compensate for shaking movements.
58 58
/ ) mode by pressing the MODE button.
STBY 0:00:00 [475Min]

Anti-Shake(HDIS)

Off
On
Exit
STBY 0:00:00 [475Min]
Anti-Shake(HDIS)
Off
On
Exit
On-screen
Use
Use the Anti-Shake function in the following cases:
Tip
• When recording while using the zoom extensively.
• When recording a close up picture of a small object.
• When recording while walking, or moving.
• When recording through a window from inside a vehicle.
• The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to
On.
• Gross camcorder shake may not be entirely corrected even if "Anti-
Shake (HDIS): On" is set. Firmly hold the camcorder with both
hands.
• When this function is set to "On," the actual movement of the subject
and the movement displayed on the screen may be slightly different.
• Recording in low lighting and at high magnification with this function
set to "On" may cause after images. If this occurs, we recommend
using a tripod (not supplied) and turning the "Anti-Shake (HDIS)" to
"Off."
display
-
Recording options