Samsung SMX-F50BP Benutzerhandbuch Seite 116

Adjusting the image during recording
Symptom
Focus does not adjust automatically.
The image appears too bright or flickering, or
changes in colour.
Playback on your camcorder
Symptom
Pressing the playback (Play/Pause) button did not
start playing.
The Skip or Search function does not work properly.
Playback is interrupted unexpectedly.
You cannot hear sound when playing a Time Lapse
recording.
Photos stored on a storage media are not displayed
in the actual size.
Playback on other devices (TV, etc.)
Symptom
You cannot view the image or hear the sound on the
connected device.
Explanation/Solution
• Set "Focus" to "Auto." page 56
• The recording conditions are not suitable for auto focus.
Adjust the focus manually.
• The lens is dusty on the surface. Clear the lens and check the focus.
• You are recording in a dark place. Increase the brightness.
• This occurs when recording images under a fluorescent lamp, sodium lamp, or
mercury lamp. Cancel "iSCENE" to minimise these phenomena.
Explanation/Solution
• Press the MODE button to set Video Play mode.
• Image files recorded on another camcorder may not play on your camcorder.
• Check out memory card compatibility.
• If the temperature inside the camcorder is too high, it cannot function properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
• Check if the AC adaptor or battery is properly connected and stable.
• The Time Lapse REC function does not record sound.
• Photos recorded on other devices may not appear at actual size.
This is not an error.
Explanation/Solution
• Connect the audio line of the Audio/Video cable jack to your camcorder and
the connected device (TV, DVD recorder, etc). (Red colour- right,
White colour- left)
• The Audio/Video cable jack is not connected properly. Make sure that the
Audio/Video cable jack is connected to the proper jack.
Troubleshooting
page 57
page 32
page 63
page 94
page 46
109 109