To set the white balance manually
1.
Select "Custom WB."
The indicator (
•
message "Set White Balance."
are displayed.
2.
Frame a white object such as a
piece of paper so that it fills the
screen. Use an object that is not
transparent.
If the object that fills the screen
•
is not focused, correct the focus
using "Manual Focus."
page 56
3.
Press the OK button.
The white balance setting will be applied and the indicator
•
(
) appears.
4.
Press the MENU button to exit the menu.
50
50
) and the
STBY
0:00:00 [475Min]
Set White Balance.
Exit
Set
•
A subject can be recorded under various types of lighting conditions
indoors (natural, fluorescent, candlelight, etc.). Because the colour
the white balance settings. Use this function for a more natural result.
•
When you set the white balance manually, the object you frame must
White thick
be white otherwise, your camcorder may not detect an appropriate
paper
setting value.
•
The adjusted setting remains until you set the white balance again.
•
During normal outdoor recording, setting to "Auto" may provide
better results.
•
Cancel the digital zoom function for clear and precise setting.
•
Reset the white balance if light conditions change.
9999
1.6M
Recording options