Samsung SMX-F50BP Benutzerhandbuch Seite 115

Symptom
When the screen is exposed
to direct sunlight during
recording, the screen turns
red or black for an instant.
During recording, the date/
time does not display.
The beep sound is not
heard.
There is a time difference
between the point where
you press the Recording
start/stop button and the
point where the recorded
video starts/stops.
The recording stops.
You cannot record a photo
image.
108 108
• Do not expose the LCD screen to direct sunlight.
• Set "Date/Time Display" to on.
• Set the "Beep Sound" to "On."
• The beep sound is temporally off while the camcorder records videos.
• When the Audio/Video cable jack is connected to the camcorder, the beep sound will automatically turn
off.
• On your camcorder, there may be a slight time delay between the point where you press Recording
start/stop button and the actual point where the recorded video starts/stops. This is not an error.
• The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a
while in a cool place.
• Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for
about 1 hour in a cool place.
• Set your camcorder to Record mode.
• Release the lock on the write-protection tab of the memory card if set.
• The storage media is full.
Use a new memory card or format the storage media.
Remove unnecessary images.
Explanation/Solution
page 84
page 24
page 80
page 69
Troubleshooting