Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LCD ENHANCER
You can enhance the contrast on the LCD screen for a clearer and
brighter image. This effect also works outdoors in bright daylight.
You can also adjust the screen brightness in two-level increments,
which provides a brighter screen than using just a one-level
increment.
1.
Press the MENU button
(Left/Right) button
Control (Up/Down/OK) button
"LCD Enhancer"
2.
Select the desired submenu item
with the Control (Up/Down) button,
and then press the OK button.
Submenu Items
Items
Off
To disable the function.
1
To turn on the 1st level of the LCD Enhancer.
To turn on the 2nd, brighter level of the LCD
2
Enhancer.
3.
Press the MENU button to exit the menu.
•
LCD enhancer function does not affect the quality of the image being
recorded.
•
When you use the LCD Enhancer in low illumination, some stripes
may appear on the LCD screen. This is not a malfunction.
•
Using the LCD Enhancer function may cause colours to look different
on the display.
86
86
Control
STBY
0:00:00 [475Min]
"Settings"
SCENE
Settings
LCD Brightness
LCD Colour
LCD Enhancer
Exit
Select
On-screen
Use
AUTO LCD OFF
To reduce power consumption, the brightness of the LCD screen
is automatically dimmed if the camcorder is idle for more than 2
minutes.
1.
Press the MENU button
(Left/Right) button
Control (Up/Down/OK) button
Auto LCD Off."
2.
: 0
Select the desired submenu item
with the Control (Up/Down) button,
:
OFF
and then press the OK button.
Submenu Items
Items
display
Off
To disable the function.
-
When the camcorder is idle for more than
2 minutes in Video or Photo STBY mode, or for
1
On
more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD
2
screen.
3.
Press the MENU button to exit the menu.
•
When the "Auto LCD Off" function is enabled, you can press any
button on the camcorder to return LCD brightness to normal.
•
Auto LCD Off will be disabled in the following case:
- If the DC power cable (AC power adaptor, USB cable) is connected.
System setting
Control
STBY
0:00:00 [475Min]
"Settings"
SCENE
"
Settings
LCD Colour
LCD Enhancer
Auto LCD Off
Exit
Select
On-screen
Use
:
OFF
:
LCD
OFF
display
-
-
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
