Handling And Transportation - Beko VCO 62607 AD Bedienungsanleitung

4 Cleaning and care
4.2.2 HEPA filter
HEPA outlet filter is located on the rear side of the
appliance.
1. Remove the HEPA filter by pulling it from its
handle.
2. Shake off the HEPA outlet filter to eliminate
the dusts on it. After that, you can wash it by
holding its clean side under running cool water.
3. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do not
use it before ensuring that it is completely dry.
4.3 Maintenance
Hand turbo brush
WARNING: Ensure the cleaner
A
is not connected to the mains
power supply when performing any
maintenance procedures.
1. Unlock the neck on the hand turbo brush by
twisting anti-clockwise.
2. Push the release buttons on the side of the
Hand Turbo Brush down to unlock the external
bristles. Rotate this bristle attachment
upwards.
3. Remove the clear cover.
4. Remove any dirt or hair from the roller brush.
5. Replace the clear cover.
6. Lock the neck on the hand turbo brush by
twisting clockwise.
7. Rotate the external bristles down and lock the
side release buttons by pushing upwards.
Vacuum Cleaner / User manual
4.4 Storage
• If you do not intend to use the appliance for a
long time, store it carefully.
• Unplug the appliance.
• Keep the appliance out of the reach of children.
4.5 Handling and
transportation
• During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
• Do not place heavy loads on the appliance or on
the packaging. The appliance may get damaged.
• Dropping the appliance may render it non-
operational or cause permanent damage.
11 / EN