Grounding And Ac-Power-Cord Connections - Herth+Buss Flash CS70 Bedienungsanleitung

Operating Instruction
7. Grounding and AC-Power-Cord
Connections
EN
WARNING
RISK OF ELECTRIC SHOCK OR FIRE.
7.1 This battery charger is for use on a no-
minal 220-240V, 50/60Hz circuit. (See
the warning label on the charger for the
correct input voltage.) The plug must be
plugged into an outlet that is properly in-
stalled and grounded in accordance with
all local codes and ordinances. The plug
pins must fit the receptacle (outlet). Do
not use with an ungrounded system.
DANGER
7.2 Never alter the AC cord or plug provided
– if it does not fit the outlet, have a proper
grounded outlet installed by a qualified
electrician. An improper connection can
result in a risk of an electric shock or elec-
trocution.
7.3 Recommended minimum AWG size for
extension cord:
100 feet (30.5 meters) long or less – use a
12 gauge (3.31 mm2) extension cord.
Over 100 feet (30.5 meters) long – use an
8 gauge (8.36 mm2) extension cord.
www.herthundbuss.com
95950004
28