Calculating Charge Time - Herth+Buss Flash CS70 Bedienungsanleitung

Operating Instruction
Voltage
The voltage displayed during charging is the
charging voltage and is usually higher than
the battery's resting voltage.

11. Calculating charge time

Use the following table to more accurately
determine the time it will take to bring a bat-
tery to full charge. First, identify where your
battery fits into the chart.
NR means that the charger setting is NOT
RECOMMENDED.
Battery size/rating
small Motorcycle,
Batteries garden tractor,
etc.
Cars/Trucks 200 - 315 CCA
315 - 550 CCA
550 - 1.000 CCA
Marine/Deep-Cycle
35
Find your battery's rating on the following
chart and note the charge time given for
each charger setting. The times given are for
batteries with a 50 percent charge prior to
recharging. Add more time for severely di-
scharged batteries.
Charge Rate/Charging Time
4 A
6 - 12 Ah 1 - 2 Hrs
12 - 32 Ah 2 - 5 Hrs
40 - 60 RC 5 ¾ - 7 ¼ Hrs
60 - 85 RC 7 ¼ - 9 ¼ Hrs
85- 190 RC 9 ¼ - 17 ½ Hrs
80 RC 8 ¾ Hrs
140 RC 13 ½ Hrs
160 RC 15 Hrs
180 RC 16 ½ Hrs
95950004
20 A 70 A
NE NE
NE NE
1 ¼ - 1 ½ Hrs 20 - 25 min
1 ½ - 2 Hrs 25 - 30 min
2 - 3 ½ Hrs 30 - 60 min
1 ¾ Hrs 30 min
2 ¾ Hrs 45 min
3 Hrs 1 Hrs
3 ½ Hrs 1 ¼ Hrs
EN