Grounding And Ac Power Cord Connections - Herth+Buss Quicky 90A Anleitung

Operating Instructions
7.7 When disconnecting the charger, always
do so in the reverse order of the connecting
EN
procedure and break the first connection
while as far away from the battery as practi-
cal.
7.8 A marine (boat) battery must be removed
and charged on shore. To charge it onboard
requires equipment specially designed for
marine use.
www.herthundbuss.com
8. GROUNDING AND AC POWER
CORD CONNECTIONS
WARNING
RISK OF ELECTRIC SHOCK OR FIRE
8.1 This battery charger is for use on a nomi-
nal 230V, 50 Hz circuit. (See the warning label
on the charger for the correct input voltage.)
The plug must be plugged into an outlet that
is properly installed and grounded in accord-
ance with all local codes and ordinances. The
plug pins must fit the receptacle (outlet). Do
not use with an ungrounded system.
DANGER
8.2 Never alter the AC cord or plug provided
– if it does not fit the outlet, have a proper
grounded outlet installed by a qualified elec-
trician. An improper connection can result in
a risk of an electric shock or electrocution.
8.3 Recommended minimum AWG size for
extension cord:
100 feet (30.5 meters) long or less – use a
16 gauge (1.31 mm
Over 100 feet (30.5 meters) long – use a
14 gauge (2.08 mm
95950003
) extension cord.
2
) extension cord.
2
30