Intended Use - Hilti TE 700-AVR Original Bedienungsanleitung

▶ Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for
the type of dust generated. Contact with or inhalation of the dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust are classified as
carcinogenic such as oak and beech dust, especially in conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing asbestos may be handled only by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may give you an electric shock if you damage an electric cable
accidentally.
▶ Check the tool's supply cord at regular intervals and have it replaced by Hilti Service if damage is found.
▶ Dirty or dusty power tools that have been used frequently for work on conductive materials should be
checked at regular intervals at a Hilti Service Center. Dust (especially dust from conductive materials) or
dampness adhering to the surface of the tool may, under unfavorable conditions, lead to electric shock.
3 Description
3.1 Overview of the product
Chuck
@
Function selector switch
;
Power level selection switch
=
On/off switch
%
Grip
&
Indicators
(
Supply cord
)

3.2 Intended use

The product described is an electrically powered breaker for medium-duty chiseling work. It is designed for
removing and breaking up concrete, masonry and stone.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which reduces vibration
significantly.
3.4 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
14
1
Air vents
+
Knob
§
Side handle
/
Theft protection indicator (optional)
:
Service indicator
∙
Power level indicator
$
Meaning
• End of service interval – servicing is due. After
the lamp lights up for the first time, the power
tool may continue to be used for several hours
before the automatic cut-out is activated. Return
the product to Hilti Service for servicing in good
time in order to ensure that it is always ready for
use.
• A fault has occurred in the tool.
• The overheating prevention cut-out has been
activated.
• The voltage provided by the electric supply is
too high.