About This Documentation; Product Information - Hilti TE 700-AVR Original Bedienungsanleitung

1 Information about the documentation
1.1 Explanation of signs used
1.1.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potential hazard that could lead to serious personal injury or
fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to slight personal
injury or damage to the equipment or other property.
1.1.2 Symbols
The following symbols are used in this document:
Read the operating instructions before use.
General warning
Instructions for use and other useful information
1.1.3 Symbols on the product
The following symbols are used on the product:
Chiseling
Chisel positioning
Protection class II (double-insulated)
1.1.4 Characters in illustrations
The illustrations in these operating instructions are intended to promote a better understanding and may
deviate from the actual version of the product.
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions.
The numbering reflects the order of the work steps in the illustration and may deviate from the
numbering of work steps in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the product overview section.
These characters are intended to draw your special attention to certain points when handling the
product.

1.2 About this documentation

▶ Read these operating instructions before the product is used or operated for the first time. This is a is a
prerequisite for safe, trouble-free handling and use of the product.
▶ Observe the safety instructions and warnings printed in this documentation and on the power tool.
▶ This document forms a permanent, integral part of the product described and must always be with the
product when it is handed over to other persons.

1.3 Product information

Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
11