HemoCue HbA1c 501 Bedienungsanleitung Seite 9

9. OPERATION
9.1 Power On
On/Off 9V USB Barcode
After proper installation, start the HemoCue® HbA1c 501 Analyzer by turning the
power switch "ON".
9.2 Warm up
When the power is connected, the display will show 'Warming up' until the device is
ready for use.
Warming up will take approximately 5 minutes depending on the ambient
temperature.
Printer
If the lid is open, the icon "Close the lid"
is displayed.
Close the lid - warming up will start.
If the cartridge is inserted, the icon "Take
out the cartridge" is displayed.
Take out the cartridge and close the lid.
Warming up will start.
While warming up, the HemoCue®
HbA1c 501 Analyzer performs hardware
functionality test to verify that the
internal optics and the mechanical
system are operating correctly.
7