Other Functions - Peltor 3M WS ProTac XP Bedienungsanleitung

GB
3:10 Changing settings in the Configure menu
The headset has a Configure menu where you can adjust settings.
To access the menu, press and hold the (–) and (+) buttons (B:8) for 2 seconds (with the headset switched on).
Access to the Configure menu is confirmed by a voice saying: "menu". To change the settings, use the (–) and (+) buttons (B:8).
To move on through the Configure menu, press briefly on the On/Off/Mode button (B:7).
See quick guide for information on how the menu is set up and where the functions are located.
VOX
Voice-operated transmit
ON
OFF
Surround Balance
Changes the left-right balance of the surround sound.
• Left
• Right
Surround Equalizer
Changes the frequency character of the surround sound.
• Low
• Normal
• High
• Extra High
Release Time
Controls how fast the AGC on the surround (tactical) function releases after going into compression.
• Fast. Appr 200ms.
• Slow. Appr 1s.
Side tone volume (applies only to Hands Free Bluetooth sound)
Feedback from bom microphone.
• OFF
• LOW
• NORMAL
• HIGH
Automatic power Off
• Off
• 2h
• 8h
Battery type
• Alkaline 2xAA 1,5 V
• Rechargeable (NiMH 1,2 V)
Reset to Factory Default
Resets all functions to the factory settings.
Hold Bluetooth button to confirm (B:10)
3:11 Connecting external equipment via a cord (Flex -77 version)
External equipment can be connected via the Flex audio input (B:6)
For information on various cords, see Spare Parts/Accessories.

4. OTHER FUNCTIONS

• The last settings are stored when the headset is switched off.
• Low battery level is indicated by a voice message: "low battery".
• Digital noise reduction on the boom microphone
4