Radio; Cd Operation - auna 10032730 Bedienungsanleitung

RADIO

This Jukebox features an built-in FM Tuner with auto-search function and
a 20 station programmable memory. When using for the first time, press
the POWER button and the Jukebox will switch to standby mode. Press
the"STANDBY" button on the control panel or the POWER button on the
remote control to turn the Jukebox ON. The Jukebox should start
in FM radio mode, the LCD display will show FM 87.5MHz and the speakers
will emit a fuzzy sound (unless the frequency 87.5MHz contains a radio
station in your area). If it does not
automatically start in FM radio mode, press the MODE button on the
Jukebox or the FUNCTION button on the remote control until FM radio
mode is entered.
1. Press and hold the  or  button to search up or down the FM
frequency to fnd a station with strong reception.
2. Press (about 3 seconds later) the  or  button redo. The FM tuner will
automatically search up or down the FM band By 0.1 Mhz increments
with each press.
3. Search and Save. Press the P/R/M button, Press the F-10 or F + 10 to
select stored position. Press the  or  button. The first 20 stations
found will be stored in memory (labelled as P01 to P20). Press F-10 or
F+10 buttons to navigate through all preset stations.

CD OPERATION

1. Press "MODE" button until LED display indicates "- - - -", then display will
show number of songs and then begin to start playback.
2. Press  , to select your desired song. Press to fast forward through a
track. You can then press the playback button to start playback.
3. Press "P/R/M" once to repeat one song, the REP indication at the top left
corner on the LED display will flash. Press "REP" one more time to repeat
all songs in the track and the REP indication at the top left corner on the
LED display will appear. Press "P/R/M" again to cancel repeat function.
press "P/R/M" once to repeat one song, the REP indication at the top
left corner on the LED display will flash, Press "P/R/M" one more time to
repeat all songs in the track and the REP indication at the top left corner
on the LED display will appear. Press the display again "RAN" on the
bottom of the display, to play songs randomly,.
4. Operate the remote control. To program, press "STOP" button to stop
playback.
5. Press "PROG" to enter programming mode. The LED display will flash
and indicate "P 01". Select the song that you want to program and then
EN
25