Recording A Record - auna 10032730 Bedienungsanleitung

RECORDING A RECORD

The Jukebox features a recording function to encode your traditional music
media (vinyl records, BT and CDs) into a digital format and record it onto a
USB device or SD card as an MP3 file(s).
1. Press the ON/OFF (Main Power) button (No. 20 on the Jukebox parts list)
to turn the Jukebox on. The unit will automatically enter standby mode.
2. Press the STANDBY button (No. 20 on the Jukebox parts list or No. 2 on
the Remote Control Function List) to wake the Jukebox from standby
mode. The unit will automatically enter FM Radio mode.
3. Press the MODE button repeatedly until the LCD display shows the
desired media source:
Audio Mode
CD
BT
Turntable
4. Insert the USB flash drive or SD card into the relevant input.
NOTE: When inserting a USB flash drive or SD card, please ensure that
there is adequate space to save tracks onto the drive and that there is no
write protection on the drive as this will prevent you from saving any files to
the drive.
5. Start playing media from the audio source (CD, PH (Vinyl) or BT).
6. Press the REC button to start recording. The LCD display will show
"REC," indicating that the audio is now being recorded onto the USB
flash drive/SD card.
NOTE: The Jukebox will save any recorded media as one long fle, the tracks
WILL NOT be split into separate fles on the USB flash drive/SD card.
NOTE: The recording speed is 1:1. Recording will take as long it takes to play
the vinyl record, BT device or CD.
7. Press the button to stop recording.
8. Once finished, pull the USB flash drive/SD card out from the Jukebox.
9. To playback the recorded fles, either load the USB flash drive/SD card
back into the Jukebox itself and follow regular playback instructions (see
page 7 for further instructions), or load the USB flash drive/SD card into
PC and search for the newly created folder called "REC". All recorded fles
will be in there.
LCD Display
----
bLUE
PH
EN
29