Filter Cleaning - Klarstein 10031695 Bedienungsanleitung

EN
20

FILTER CLEANING

Note: Cut off the power when u clean. No detached the filter around, or lead to the
filter scatter. If the plug wire or plug damage, must use the specific flexible wire or get
it in service center.
Cleaning the grease mesh filter
The mesh filters can be cleaned by hand. Soak them for about 3 minute in water with a
grease-loosening detergent then brush it gently with a soft brush. Please do not apply
too much pressure, avoid to damage it . (Leave to dry naturally out of direct sun light)
Filters should be washed separately to crockery and kitchen utensils. it is advisable not
to use rinse aid.
Installing the grease mesh filter
• To install filters for the following four steps .
• Angle the filter into slots at the back of the hood.
• Push the button on handle of the filter.
• Release the handle once the filter fits into a resting position.
• Repeat to install all filters.
Aluminium filter