Contro Panel And Key Functions - Klarstein 10032041 Bedienungsanleitung

CONTRO PANEL AND KEY FUNCTIONS

POWER In standby state press the Power button to start, and during operation
of the dehumidifier press the Power button to shut down. For initial
startup the default is low wind, the display show the environment
temperature and the default set humidity is RH50%. If the dehumidifier
is not energized for the first time, after startup the state is kept the
same as that before shutdown. The LED is closed, only power light is
illuminated when standby.
MODE In boot state or regular boot, press this button to chose autumatic
dehumidification or continuous dehumidification (dry function), each
function have 2 second confinnation delay time.
TIMER In boot state, press this button, the LED light and blink. In blink time,
press up/down button to set the time of timing. press up/down buttom
to add/reduce one hour . Keep pressing the up/down button to
add/reduce time as well. The maximum is 24 hour, the minimum is 1
hour. LED blink 5 time to confinn the timing set. Press the timer button
again to reset the timing time in timing status.
UP/ Press up/down button( each press for 5%RH to select humidity from
DOWN 30-80%RH only in automatic dehumidification.
WIND Press this button to choose fan speed, high-low-high, only valid in
automatic dehumidification. Keep pressing fan speed button for 5s to
start inside dry.
EN
13