Operation; Menu Structure - EuroLite LED TMH-46 Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.

Menu structure

The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Menu. Press Enter in order to select the desired menu. You can change the selection by pressing Up or
Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions provided
are described in the following sections.
Mode
DMX mode
Master/slave mode
Auto mode
Microphone sensitivity
for sound control
No DMXs ignal
Display illumination
Display indication
PAN movement
TILT movement
Reset
Display
Addr A001~ A512
16 CH
CHnd
18 CH
SL 1
SL 2
SLnd
Auto
Sound
SH 0
SH 1
SHnd
SH 2
SH 3
SEnS 0-100
blAC
Auto
bLnd
Soun
HLod
on
LEd
oFF
No
dISP
Yes
No
rPAn
Yes
No
rTIL
Yes
No
rESt
Yes
22/28
Function
Start address
16-channel mode
18-channel mode
Slave mode 1
Synchronous movement
Slave mode 2
Asynchronous movement
Auto mode
Sound control
Program 0
Program 1
Program 2
Program 3
Microphone sensitivity low > high
Blackout
Auto mode
Sound control
Hold
Display on
Display off
normal display indication
Display indication reversed by 180°
normal PAN movement
inverted PAN movement
normal TILT movement
inverted TILT movement
no reset
Reset
00113093, Version 1.0