Maintenance And Service - BTI PROFILINE -BH 2-26 ME Bedienungsanleitung

Maintenance
Before any work on the machine itself, pull the mains
plug.
For safe and efficient working, always keep the ma-
chine and the ventilation slots clean.
Clean the tool holder after each use.
Replacing the Dust Protection Cap
Replace the dust protection cap 4 without delay if it is
damaged. A damaged dust protection cap can allow
dust to penetrate into the tool holder and lead to mal-
functions.
Have the replacement of the dust protection cap
performed by a customer service agent.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Strain relief
Live = brown
Neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
If the machine should fail despite the care taken in the
manufacture and testing, have the repair performed
exclusively by the BTI customer service.
For all inquires and replacement parts orders, please
include the article number on the nameplate of the ma-
chine in all cases.
1 619 929 704 • (05.06) T

5 MAINTENANCE AND SERVICE

To be fitted
by qualified
professionals only
English–8
Disposal
Power tools, accessories and packaging should be
disposed of for recycling in an environmentally friendly
manner.
Only for EU countries
Do not dispose of power tools into
household waste!
According to the European Guide Lines
2002/96/EC for waste electric and
electronic equipment and its imple-
mentation into national law, power
tools that are no longer usable must be collected sep-
arately and recycled in an environmentally friendly
manner.
Specifications subject to change without notice