Repeat BH/ARC Mode
START
H
End BH/ARC mode
Cancel BH/ARC mode
F
36
Operating Procedure
If an operation is performed when End is displayed, the
display will return to the present values. However, the
scale does not exit BH/ARC function mode. If the scale is
moved to the center coordinates and the Execute key is
pressed again, the operation is repeated using the same
parameters.
If an operation is performed when End is displayed, the
display will return to the present values.
If an operation is performed while the BH/ARC function
mode is in progress, the display returns to the present
values.
The BH/ARC and REF-LEDs all go out.
Display
BH/ARC REF