Data Storage; Interrupting The Operation - Sony LH51 Bedienungsanleitung

5-5. Data Storage

Interrupting the operation

Resuming operation
SONY is displayed.
SONY flashes.
26
When power is switched to OFF, the display value and preset data values are automatically held
in memory. Because of this function, it is possible to interrupt operation and switch the power OFF
or even sustain a sudden power outage without losing data. Restoring data is thus greatly
simplified.
1
Lock the machine.
Before interrupting the operation, be sure to lock the machine.
Otherwise, correct restoration of the displayed value may be
impossible.
2
Set the power switch to OFF.
Data will be retained at the point the power is switched OFF.
Note
If the machine table is moved after the power is switched OFF, the table movement is not tracked
and when power is restored, the table position will not agree with the stored data which is
displayed automatically.
1
Set the power switch to ON.
• Normal Restart
RESET
Push the
• When the stored data is erroneous
RESET
Push the
2
Unlock the Machine and Resume operation
key.
RESET
Display of data at the time power was switched OFF.
(Incremental mode is displayed.)
Initial setting mode is displayed.
key.
RESET
LOCK
Power switch
OFF ON
Prepare to restart work.