Current Position Display And Operating Mode Indicators - Sony LH51 Bedienungsanleitung

• LH52 keys
Name of part
F
Function key
L
LOAD key
H
HOLD key
TOOL
Tool coordinate
changing key

4-3. Current Position Display and Operating Mode Indicators

Name of part
inch/mm selector key
Digital display
Mode indicators
10
Function
Used to select the Absolute zero
point detection mode.
Pressing this key again returns to the
original mode.
Used to start the counting when the
absolute zero point of the scale is
passed in the Absolute zero point
detection mode.
1. Used to hold the display and input
the tool coordinate.
2. Used to store the hold display
value in the memory or to release the
hold display to display the current
value in the Absolute zero point
detection mode.
Used to change the tool coordinate
(tool No.).
Press it to select English (in inches) or metric (in millimeters) display.
Displays for each axis a positive or negative value of 7 digits with unnecessary leading zeros blanked out. An
alarm is also displayed in case of trouble.
ABS
Indicates the absolute mode is set. The distance from the spot position to the datum point initially set is
displayed.
ABS is indicated also when a datum point is established.
INC
Indicates the incremental mode is set. In this mode, incremental positioning is made with
preset key .
P
ø
Indicates that the resolution is set to diameter display mode.
Function
keys and
RESET