Correcting Erroneous Operations - Sony LH51 Bedienungsanleitung

• Basic key operations for the LH52
Absolute zero point of scale (measurement from absolute zero point):
Absolute zero point of scale (measurement to absolute zero point):
Relocating the cutting datum point from the absolute zero point of scale:
Holding displayed values:

5-4. Correcting Erroneous Operations

1) When you have pressed the wrong axis selector key:
2) When you have pressed the wrong number key:
3) When LOAD key
4) To cancel the hold:
F
Press the key once to select the absolute zero point mode.
F
Number keys (data input)
X
F
Press the key once to select the absolute zero point mode.
F
X H
[Absolute zero point passed → Display is held.]
For storing the hold value into memory:
F
Press the key once to select the absolute zero point mode.
F
X L [Zero point passed → Counting starts.]
X H
Number key (Enter the tool No. 1 to 9.)
TOOL
• To select the correct axis, press the correct axis selector key.
• To clear the axis selection mode, press the cancel key
• Press the cancel key
have pressed the or
S
the correct numerals.
SET
L /
L
Press the Axis selector key of the relevant axis and the Cancel key
Press the Axis selector key of the held axis and the Cancel key
value display.
[Absolute zero point passed → Counting starts.]
L
X H
and axis selector key before entering the correct numerals. If you
key by mistake, press the axis selector key before entering
P
START
or HOLD key H / is pressed by mistake:
H
.
, and repeat the entry.
to return to the present
25