5-1-9. Setting inch/mm switching
• After completing 5-1-6 or 5-1-8, press the X-axis selector key to select the mode for setting
• Inch/mm switching can be enabled or disabled with the
• Inch/mm switching is enabled exfactory.
Example
X
0
or
whether or not inch/mm switching is performed.
Operating Procedure
Select the input to the first axis.
Press the
or
key.
0
Pressing the
or
key again returns to
0
the original display unit.
key or
key.
0
Display
(inch/mm switching enabled)
(inch/mm switching disabled)
(inch/mm switching enabled)
21