Product Features - INVENTOR R2-ION8L Bedienungsanleitung

5. PRODUCT FEATURES

Model Name
Dehumidifying Capacity (L/24hours)
Power Supply (V/Hz)
Power Consumption (W)
Noise Level (dB(A)) (Lo/Mi/Hi)
Air Output m /h
3
Water Tank (L)
Dimensions (WxDxH) (mm)
Net Weight / Gross Weight (kg)
Length of Drain Hose (m)
Length of Power Cord (m)
Type
Operational Temperature range (ºC)
*Choosing the correct dehumidifier should be based on the following factors:
The size of the room
l
The room temperature
l
The relative humidity
l
Room insulation
l
Consumption values may vary depending on the relative humidity in the room of op-
eration.
**30W Consumption during the fan operation.
The fan only operation is a function that cannot be manually selected. It is automatical-
ly selected when the moisture content in the room is lower than that set by the MODE
button.
When Low Fan Speed is set, the consumption can reach a maximum of 330W, regard-
less of the mode (MODE) that has been selected.
When the Medium or High Fan Speed is set, the consumption may reach a maximum
of 650W.
The deviation rate of the above values is +/- 5%.
*** Desiccant dehumidifiers, operate without the use of a compressor, which is con-
sidered cutting edge technology for greater efficiency at lower room temperatures. In-
cluding an absorbent Desiccant dehumidifying wheel, that reduces the room's humid-
ity during its rotation. An electrical resistance heats the Desiccant element discarding
the collected humidity directly inside the water bucket.
8
R2-ION8L/R2-ION8LBS
*8
220~240 / 50
**30/330/650
39/43/48
120
2
351 × 180 × 500
6.0/6.3
2
1.94
***Desiccant
1-37
EN