Adjusting The Loop Handle - Stihl Fsa 130 R Gebrauchsanleitung

English
► Connect the carrying ring (2) to the carabiner (1).
► Let go of the trimmer and check to see how it is balanced
- the cutting attachment should just rest on the ground.
3
► If the trimmer cannot be balanced:
► Loosen the screw (2).
54
1
2
2
► Move carrying ring (1) up or down the drive tube and
tighten the screw (2) moderately.
► Check balance again.
► If trimmer is properly balanced: Tighten down the
screw (2) firmly.
7.5

Adjusting the Loop Handle

The loop handle can be set to different positions to suit the
height and reach of the user.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Loosen the screws (2).
► Move the loop handle (1) to the required position and
make sure that:
– The spacer sleeve (3) fits between the loop handle (1)
and carrying ring.
– If you are using a mowing head: a = no more than 30 cm
– If you are using a metal cutting attachment: a = no more
than 25 cm
► Tighten down the screws (2) so that the loop handle
cannot be rotated on the drive tube.
7 Adjusting Trimmer for User
1
a
2
3
0458-725-9921-A