Fitting And Removing The Skirt; Mounting And Removing The Mowing Head - Stihl Fsa 130 R Gebrauchsanleitung

English
6.3.2 Removing the Deflector
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
2
► Take out the screws (2).
► Pull off the deflector (1).
6.4

Fitting and Removing the Skirt

6.4.1 Fitting the Skirt
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
1
2
► Slide the guide slot in the skirt (2) onto the deflector (1) –
it must snap into position.
► Push the line limiting blade (3) into the slot in the skirt (2).
► Insert and tighten down the screw (4) firmly.
48
6.4.2
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
1
► Insert stop pin (2) into the hole in the skirt (1).
► Use the stop pin (2) to slide the skirt (1) off the deflector.
The line limiting blade (1) can be left on the skirt.
6.5
6.5.1
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
3
4
► Place the thrust plate (2) on the shaft (3) so that its smaller
diameter faces up.
► Fit the mowing head (1) on the shaft (3) and turn it
counterclockwise.
Removing the Skirt
1

Mounting and Removing the Mowing Head

Mounting the Mowing Head
1
2
3
4
6 Assembling the Trimmer
2
1
4
0458-725-9921-A