AEG FSK93800P Benutzerinformation Seite 17

• Normal: select the value to
deactivate TimeSaver and press
to confirm.
5. Close the appliance door to start the
programme.
How to start the MyFavourite
programme
1. Press and hold
seconds until the display shows the
MyFavourite programme.
2. Close the appliance door to start the
programme.
How to delay the start of a
programme
It is not possible to set the delay start of
the MyFavourite programme.
1. Select a programme.
2. Press .
The display shows the option list.
3. Select Delay and press
The display shows the number of hours
available for the delay start (from 1 to 24).
4. Select the desired number of hours
and press
The display returns to the option list.
5. You can set other applicable options.
6. Press repeatedly until the display
shows the selected programme.
7. Press to confirm the
programme selection.
8. Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts.
How to cancel the delay start
while the countdown operates
The programme and options are set to
their default values when you cancel the
delay start.
1. Open the appliance door.
2. Press and hold
seconds. The display shows: Stop
washing? and two values.
for about 3
.
to confirm.
for about 3
• Stop: select the value to cancel
the delay start. Press
confirm.
• Resume: select the value to
resume the countdown. Press
to confirm. Close the
appliance door.
How to cancel the running
programme
1. Open the appliance door.
2. Press and hold
seconds. The display shows: Stop
washing? and two values.
• Stop: select the value to cancel
the running programme. Press
to confirm.
• Resume: select the value to
resume the running programme.
Press to confirm. Close the
appliance door.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry
function.
End of the programme
When the programme is complete, the
TimeBeam displays 0:00 and CLEAN.
1. Press the on/off button or wait for
the Auto Off function to
automatically deactivate the
appliance. If you open the door
before the activation of Auto Off, the
ENGLISH 17
to
for about 3