Option List; How To Set An Option - AEG FSK93800P Benutzerinformation

12 www.aeg.com

7.1 Option list

Options
Delay
XtraDry
Extra Hygiene
Settings

7.2 How to set an option

The option list shows only the options
that are applicable to the selected
programme.
Not all options are compatible with each
other. If you select options that are not
compatible, the appliance automatically
deactivates one or more of them. The
display informs which options are
deactivated.
When the programme is complete or
cancelled, the options are set to the
default values.
1. Select a programme.
2. Press
The display shows applicable options.
3. Select an option.
The display shows the default option
value in parenthesis.
4. Press
OFF to ON or vice versa.
If you select Delay and press
display shows the number of hours
available for the delay start. Select the
desired delay time and press
confirm.
5. Press
shows the selected programme.
Values
From 1 to 24 hours
OFF (default value)
ON
OFF (default value)
ON
OFF (default value)
.
to change the value from
repeatedly until the display
7.3 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than ECO 50°. It is
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time ECO 50° is
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates TimeSaver
and vice versa.
7.4 TimeSaver
TimeSaver allows to reduce the duration
of a selected programme by
approximately 50%.
This option increases the pressure and
the temperature of the water. The
, the
washing and the drying phases are
shorter.
The washing results are the same as with
to
the normal programme duration. The
drying results can decrease.
Activate TimeSaver the following way:
Select a programme and press
Description
Delays the start of a pro-
gramme.
Boosts the drying perform-
ance. Refer to specific infor-
mation provided in this
chapter.
Ensures better hygiene re-
sults by keeping the temper-
ature at 70 °C for at least 10
minutes during the last rins-
ing phase.
Shows the appliance settings
.