AEG FSK93800P Benutzerinformation Seite 10

10 www.aeg.com
Settings
Key tones
Volume
Brightness
Contrast
Water hardness
Rinse aid level
Languages
Display on floor
Reset settings
6.2 How to change a setting
with 2 values (ON and OFF)
Saved settings remain valid until you
change them again.
1. Press
The display shows the option list.
2. Select Settings and press
The display shows the setting list.
3. Select a setting and press
change the setting value.
• The setting value changes from
ON to OFF or vice versa.
• The display remains in the
settings list.
4. Press
shows the programme list.
.
repeatedly until the display
Values
Click
Beep
Off
From level 1 to level 10 Adjust the sound volume.
From level 0 to level 9
From level 0 to level 9
From level 1 to level 10 Adjust the level of the water
From level 0 to level 6
Level 0 = no release of
rinse aid
List of languages
White
None
Reset
Cancel
6.3 How to change a setting
with multiple values
Saved settings remain valid until you
change them again.
1. Press
The display shows the option list.
2. Select Settings and press
.
The display shows the setting list.
to 3. Select a setting and press
enter the setting.
4. Use
setting value.
5. Press
The display returns to the setting list.
6. Press
shows the programme list.
Description
Set the sound of the buttons
when pressed.
Adjust the brightness of the
display.
Adjust the contrast of the
display.
softener according to the
water hardness in your area.
Factory setting: level 5.
Adjust the released quantity
of the rinse aid according to
the required dosage.
Factory setting: level 4.
Set the preferred language.
Default language: English.
Activate or deactivate the
TimeBeam.
Factory setting: White.
Reset the appliance to the
factory settings.
.
and to change the
to save the setting.
repeatedly until the display
.
to