Complete The Installation Procedure; Operation; Safety Instructions For Operation; Open Or Close The Garage Door (In Normal Operation Mode) - Novoferm N-423 Montageanleitung

Operation

Complete the installation procedure

1. Close the cover of the drive head.
2. Check if the garage door operates properly and safely. Refer to the section 'Maintenance / Checks'.
Operation

Safety instructions for operation

Warning:
Use only by trained persons. All users must be familiar with the applicable safety regulations.
Warning:
Keep the hand transmitters out of reach of children.
Warning:
When the drive is actuated, the opening and closing processes must be monitored.
The garage door must be visible from the place of operation.
Make sure that no persons or objects are in the travel path of the garage door.
The stated safety and instructions as well as the accident prevention regulations and general safety regulations
must be adhered to.

Open or close the garage door (in normal operation mode)

The garage door can be operated by many devices (hand transmitter, key switch etc.). This description only
mentions the hand transmitter. But the other devices work in the same way.
1. Briefly press the button on the hand transmitter.
Depending on the current position, the garage door then goes to the OPEN or CLOSE position.
2. If needed, briefly press the button on the hand transmitter to stop the movement of the garage door.
3. If needed, press the button on the hand transmitter once again to make the garage door move in the other
direction.
Note:
A button on the hand transmitter can be set with the function "4-minute light". By using the hand transmitter the
light will be turned on, independently from the drive unit. After 4 minutes the light will be turned off.
48 N-423