Button Functions; Rgb Mode - Klarstein Aurica RGB Bedienungsanleitung

EN
18

BUTTON FUNCTIONS

Depress this button to turn on/off the motor.
Press this button for increasing the speed of the fan.
Press this button for decreasing the speed of the fan.
Turn on/off light.
Fan speed display:
1 = low speed
2 = medium speed
3 = high speed
Quick timer:
Press + & - hold for 1 second, Digital display will flashing & into 5 minutes count down,
after 5 minutes motor & light will turn off automatic & Buzzer sound for 1 second.

RGB MODE

At standby / working mode, short press light button for the first time to turn on LED light
and RGB light at the same time; press the second time only LED light work; press the third
time to switch to RGB mode.
At standby / working mode,long press light button to enter into toning mode , then the
first two digit display [0], that means have been entered into setting. Short press [-] and
[+] to adjust color [L1] to [L9]. If any color is chosen, the corresponding light will be on.
After the color is setting, long press light button to back to original mode.
Color represents: [L1] White, [L2] Red, [L3] Green, [L4] Blue , [L5] Yellow,
[L6] Purple, [L7] Orange, [L8] Cyan, [L9] Yellow green.