Klarstein Aurica RGB Bedienungsanleitung Seite 19

BULB AND LAMP REPLACEMENT
Replacing Bulbs
• Switch the unit off and unplug the appliance. Remove the lamp cover by unscrewing
the 2 screws.
• Unscrew the incandescent bulb. Replace with the same type and rated bulb:
Replacing LED Lamps
• Disconnect the light wiring point which is located within the hood, (behind the
grease filer).
• Then use a screw driver remove the bulb holders and wiring from the hood. Replace
with the same type and rated lamp:
LED Lamp: max 1.5 W
EN
19